หน้าหลัก / บริการ / Quality Inspection

Electronic Component Authentication and Inspection

Buying outside the authorized channel only works if you can trust what arrives. Every part Auxicen Electronics ships goes through electronic component authentication in our Shenzhen inspection room first. Here is exactly what we check, and what we send you.

electronic component authentication under a stereo microscope

เสนอราคาภายใน 24 ชั่วโมง

ตรวจสอบชิ้นส่วนทุกชิ้นก่อนจัดส่ง

รับประกันคุณภาพ 365 วัน

จัดส่งไปยังมากกว่า 60 ประเทศ

The Problem: Counterfeit Electronic Components

Counterfeit electronic components are a real risk in the open market, especially for obsolete and allocated parts. Common types:

ประเภท

What it is

Remarked parts

A cheaper or lower-grade part with the marking sanded off and reprinted

Recycled parts

Parts pulled from scrap boards, cleaned and sold as new

Blacktopped parts

Package resurfaced to hide old markings

Cloned or fake die

Package looks right, but the die inside is different or missing

Out-of-spec rejects

Factory rejects sold as good parts

Counterfeit semiconductors can pass a quick look and fail in the field. That is why checking component authenticity needs several methods, not one.

การตรวจสอบด้วยรังสีเอกซ์ของเซมิคอนดักเตอร์ที่ล้าสมัย

How Counterfeit Electronic Parts Enter the Supply Chain

Most counterfeit components start as electronic waste. Boards are stripped, parts are cleaned and sorted, and the best-looking ones are remarked as a newer date code, a higher temperature grade or a more expensive part number. Others are factory rejects that should have been scrapped.

These parts then pass through several traders before reaching a buyer, which is why every independent distributor needs its own electronic components counterfeit mitigation process instead of trusting the previous owner.

The risk rises sharply in two situations: when a part is obsolete and genuine stock is scarce, and during shortages when buyers accept offers they would normally question.

Visual Inspection Checklist for Components

These are the warning signs our inspectors look for first. The same visual inspection checklist is a good start for your own incoming inspection:

Area

Warning sign

Label and packaging

Label font, layout or barcode that does not match the manufacturer's format; mixed date codes in one reel; reused moisture barrier bags

Package surface

Sanding marks, a texture that differs between parts, a coating that rubs off (blacktopping)

Marking

Uneven or blurred print, wrong logo, marking that comes off with solvent

Pin 1 and mold marks

Ejector pin marks in the wrong position or filled in

Leads and balls

Re-tinned leads, solder residue, scratches, bent or uneven leads, irregular BGA balls

Dimensions

Body size or thickness outside datasheet limits

A part that passes the visual checklist is not proven genuine. Counterfeit electronic component detection needs X-ray, and for critical parts, decapsulation.

Inspection on Every Order

Five checks run on every order before anything ships.

X-ray electronic component testing showing bond wires

ตรวจสอบ

What we check

What it catches

Documentation check

Part number, quantity, date code and lot code against the PO; label format against the manufacturer's standard

Wrong part, mixed lots, fake labels

External visual inspection

Leads, body, marking and surface under a stereo microscope

Bent or re-tinned leads, sanding marks, resurfacing

การทดสอบความคงทนของการทำเครื่องหมาย

Solvent test on the marking

Reprinted (remarked) markings

Package & dimension check

Package measurements against the datasheet

Wrong package, clones

X-ray inspection

Die size, lead frame and bond wires, compared across samples in the lot

Missing die, wrong die, mixed parts

How We Sample Each Lot

Every unit gets the documentation and packaging check. Detailed microscope, marking and X-ray inspection is done on samples taken from different reels, trays and date codes in the lot.

Lot size

Units inspected in detail

1–10

All units

11–500

10 units, or more when the lot holds several date codes

501–5,000

20 units

Over 5,000

32 units

If any sample fails, the whole lot is held and inspected further. You can ask for 100% visual or X-ray inspection on any order; the extra time is shown in the quote.

Third-Party Electronic Component Testing

For high-reliability applications, or when a lot raises questions, we send samples to independent labs.

The cost and extra lead time are shown in your quote before you confirm.

01

การเปิดผนึก: to decap an IC chip, the lab removes the mold compound with acid or a laser and checks the die markings, logo and layout against the manufacturer. Decapping IC chips is destructive, so it is done on one or two samples.

02

Electrical / functional testing: key datasheet parameters.

03

Solderability testing: checks lead finish and aging.

04

XRF analysis: lead finish composition, including RoHS checks.

About AS6081 Authentication and Related Standards

Several industry standards describe how to keep counterfeit components out of a supply chain:

Standard

Who it is for

What it covers

SAE AS6081

Distributors

Counterfeit risk mitigation, supplier control, inspection and test methods for parts bought outside the authorized channel

SAE AS5553

Equipment manufacturers

Counterfeit avoidance, detection, mitigation and disposition in an OEM's own processes

SAE AS6171

Test labs

Detailed test methods, from external visual to X-ray, XRF and decapsulation

IDEA-STD-1010

Independent distributors

Acceptability criteria for visual inspection of electronic components

AS6081 authentication is the reference most often written into purchase contracts. Our in-house checks cover the external visual, marking and X-ray steps used in this kind of process, and third-party lab tests cover decapsulation and electrical testing. If your contract requires testing to a specific standard, tell us when you request a quote and we will arrange it through an accredited lab.

What You Receive

Inspection photos

Photos for every line: labels, markings, leads.

X-ray images

X-ray images for inspected lines.

Lab report

Third-party lab report when testing was ordered.

365-day warranty

If parts fail at your incoming inspection, we replace or refund.

How to Avoid Counterfeit Electronic Components

A counterfeit avoidance program is the set of rules a buyer follows so that non-counterfeit electronic components reach production. It does not need to be complicated:

01

Buy authorized first

Use the open market only when authorized stock is not available.

02

Qualify suppliers

Ask how they inspect, what they send with each shipment and what warranty they give.

03

Evidence before paying

Date codes, stock photos and the location of the stock.

04

Inspect on arrival

At least a label, visual and marking check; X-ray or lab testing for critical parts.

05

Keep records

Supplier, lot, date code and inspection results for each delivery, so a problem can be traced.

When buying online, be careful with prices far below market and sellers who cannot show photos of the actual parts.

Where Inspection Matters Most

Authentication FAQ

ฉันจะตรวจสอบความแท้ของชิ้นส่วนได้อย่างไรด้วยตัวเอง?

เริ่มต้นด้วยป้ายกำกับและรหัสวันที่ จากนั้นดูที่เครื่องหมายและขาใต้การขยาย เปรียบเทียบกับชิ้นส่วนที่ทราบว่าดีถ้าคุณมี เพื่อผลลัพธ์ที่น่าเชื่อถือ จำเป็นต้องใช้การเอกซ์เรย์และการถอดเปลือก ซึ่งเป็นเหตุผลที่เราทำเองภายในหรือผ่านห้องปฏิบัติการ.

โปรแกรมป้องกันการปลอมแปลงสำหรับชิ้นส่วนอิเล็กทรอนิกส์คืออะไร?

กระบวนการที่มีเอกสารครอบคลุมวิธีการอนุมัติซัพพลายเออร์ วิธีการตรวจสอบและทดสอบชิ้นส่วน และสิ่งที่จะเกิดขึ้นกับชิ้นส่วนที่น่าสงสัย มาตรฐานเช่น AS5553 สำหรับผู้ผลิตและ AS6081 สำหรับผู้จัดจำหน่ายอธิบายว่าโปรแกรมดังกล่าวควรประกอบด้วยอะไรบ้าง.

คุณตรวจสอบคำสั่งซื้อทุกคำสั่งหรือไม่?

ใช่ เอกสาร ภาพ ตรวจสอบการทำเครื่องหมาย และการวัดขนาดจะทำในทุกคำสั่งซื้อ มีการเอ็กซ์เรย์กับตัวอย่างจากแต่ละล็อต.

จะเกิดอะไรขึ้นหากชิ้นส่วนไม่ผ่านการตรวจสอบของคุณ?

เราไม่จัดส่งสินค้า เราจะแจ้งให้คุณทราบ และเสนอแหล่งอื่นหรือการคืนเงิน.

ฉันสามารถส่งชิ้นส่วนของตัวเองไปทดสอบได้ไหม?

ยังไม่มีในตอนนี้ บริการตรวจสอบของเราเป็นส่วนหนึ่งของชิ้นส่วนที่เราจัดหา.

Is inspection included in the price?

In-house inspection is included. Third-party lab testing is quoted separately.

หาอะไหล่ของคุณไม่เจอ?

ส่งหมายเลขชิ้นส่วนหรือ BOM เต็มของคุณมาให้เรา เราจะตรวจสอบสต็อกและเครือข่ายซัพพลายเออร์และตอบกลับภายใน 24 ชั่วโมง.