Trả lời trong vòng 24 giờ
Trang chủ / Dịch vụ / Quality Inspection
Electronic Component Authentication and Inspection
Buying outside the authorized channel only works if you can trust what arrives. Every part Auxicen Electronics ships goes through electronic component authentication in our Shenzhen inspection room first. Here is exactly what we check, and what we send you.
Báo giá trong vòng 24 giờ
Mỗi linh kiện được kiểm tra trước khi giao hàng
Bảo hành chất lượng 365 ngày
Giao hàng tới hơn 60 quốc gia
The Problem: Counterfeit Electronic Components
Counterfeit electronic components are a real risk in the open market, especially for obsolete and allocated parts. Common types:
Loại
What it is
Remarked parts
A cheaper or lower-grade part with the marking sanded off and reprinted
Recycled parts
Parts pulled from scrap boards, cleaned and sold as new
Blacktopped parts
Package resurfaced to hide old markings
Cloned or fake die
Package looks right, but the die inside is different or missing
Out-of-spec rejects
Factory rejects sold as good parts
Counterfeit semiconductors can pass a quick look and fail in the field. That is why checking component authenticity needs several methods, not one.
How Counterfeit Electronic Parts Enter the Supply Chain
Most counterfeit components start as electronic waste. Boards are stripped, parts are cleaned and sorted, and the best-looking ones are remarked as a newer date code, a higher temperature grade or a more expensive part number. Others are factory rejects that should have been scrapped.
These parts then pass through several traders before reaching a buyer, which is why every independent distributor needs its own electronic components counterfeit mitigation process instead of trusting the previous owner.
The risk rises sharply in two situations: when a part is obsolete and genuine stock is scarce, and during shortages when buyers accept offers they would normally question.
Visual Inspection Checklist for Components
These are the warning signs our inspectors look for first. The same visual inspection checklist is a good start for your own incoming inspection:
Area
Warning sign
Label and packaging
Label font, layout or barcode that does not match the manufacturer's format; mixed date codes in one reel; reused moisture barrier bags
Package surface
Sanding marks, a texture that differs between parts, a coating that rubs off (blacktopping)
Marking
Uneven or blurred print, wrong logo, marking that comes off with solvent
Pin 1 and mold marks
Ejector pin marks in the wrong position or filled in
Leads and balls
Re-tinned leads, solder residue, scratches, bent or uneven leads, irregular BGA balls
Dimensions
Body size or thickness outside datasheet limits
A part that passes the visual checklist is not proven genuine. Counterfeit electronic component detection needs X-ray, and for critical parts, decapsulation.
Inspection on Every Order
Five checks run on every order before anything ships.
Kiểm tra
What we check
What it catches
Documentation check
Part number, quantity, date code and lot code against the PO; label format against the manufacturer's standard
Wrong part, mixed lots, fake labels
External visual inspection
Leads, body, marking and surface under a stereo microscope
Bent or re-tinned leads, sanding marks, resurfacing
Kiểm tra độ bền của dấu hiệu
Solvent test on the marking
Reprinted (remarked) markings
Package & dimension check
Package measurements against the datasheet
Wrong package, clones
X-ray inspection
Die size, lead frame and bond wires, compared across samples in the lot
Missing die, wrong die, mixed parts
How We Sample Each Lot
Every unit gets the documentation and packaging check. Detailed microscope, marking and X-ray inspection is done on samples taken from different reels, trays and date codes in the lot.
Lot size
Units inspected in detail
1–10
All units
11–500
10 units, or more when the lot holds several date codes
501–5,000
20 units
Over 5,000
32 units
If any sample fails, the whole lot is held and inspected further. You can ask for 100% visual or X-ray inspection on any order; the extra time is shown in the quote.
Third-Party Electronic Component Testing
For high-reliability applications, or when a lot raises questions, we send samples to independent labs.
The cost and extra lead time are shown in your quote before you confirm.
01
Phá vỏ: to decap an IC chip, the lab removes the mold compound with acid or a laser and checks the die markings, logo and layout against the manufacturer. Decapping IC chips is destructive, so it is done on one or two samples.
02
Electrical / functional testing: key datasheet parameters.
03
Solderability testing: checks lead finish and aging.
04
XRF analysis: lead finish composition, including RoHS checks.
About AS6081 Authentication and Related Standards
Several industry standards describe how to keep counterfeit components out of a supply chain:
Standard
Who it is for
What it covers
SAE AS6081
Distributors
Counterfeit risk mitigation, supplier control, inspection and test methods for parts bought outside the authorized channel
SAE AS5553
Equipment manufacturers
Counterfeit avoidance, detection, mitigation and disposition in an OEM's own processes
SAE AS6171
Test labs
Detailed test methods, from external visual to X-ray, XRF and decapsulation
IDEA-STD-1010
Independent distributors
Acceptability criteria for visual inspection of electronic components
AS6081 authentication is the reference most often written into purchase contracts. Our in-house checks cover the external visual, marking and X-ray steps used in this kind of process, and third-party lab tests cover decapsulation and electrical testing. If your contract requires testing to a specific standard, tell us when you request a quote and we will arrange it through an accredited lab.
What You Receive
Inspection photos
Photos for every line: labels, markings, leads.
X-ray images
X-ray images for inspected lines.
Lab report
Third-party lab report when testing was ordered.
365-day warranty
If parts fail at your incoming inspection, we replace or refund.
How to Avoid Counterfeit Electronic Components
A counterfeit avoidance program is the set of rules a buyer follows so that non-counterfeit electronic components reach production. It does not need to be complicated:
01
Buy authorized first
Use the open market only when authorized stock is not available.
02
Qualify suppliers
Ask how they inspect, what they send with each shipment and what warranty they give.
03
Evidence before paying
Date codes, stock photos and the location of the stock.
04
Inspect on arrival
At least a label, visual and marking check; X-ray or lab testing for critical parts.
05
Keep records
Supplier, lot, date code and inspection results for each delivery, so a problem can be traced.
When buying online, be careful with prices far below market and sellers who cannot show photos of the actual parts.
Where Inspection Matters Most
Authentication FAQ
Làm thế nào để tôi tự kiểm tra tính xác thực của linh kiện?
Bắt đầu với nhãn và mã ngày, sau đó xem các dấu hiệu và chân linh kiện dưới kính lúp. So sánh với một linh kiện tốt đã biết nếu bạn có. Để có kết quả đáng tin cậy, cần chụp X-quang và bóc tách, đó là lý do tại sao chúng tôi thực hiện trong nhà hoặc thông qua các phòng thí nghiệm.
Chương trình tránh hàng giả cho các linh kiện điện tử là gì?
Một quy trình được tài liệu hóa bao gồm cách các nhà cung cấp được phê duyệt, cách các bộ phận được kiểm tra và thử nghiệm, và những gì xảy ra với các bộ phận nghi ngờ. Các tiêu chuẩn như AS5553 dành cho nhà sản xuất và AS6081 dành cho nhà phân phối mô tả những gì một chương trình như vậy nên bao gồm.
Bạn có kiểm tra mọi đơn hàng không?
Vâng. Tài liệu, kiểm tra hình ảnh, đánh dấu và kích thước được thực hiện trên mỗi đơn hàng. Chụp X-quang được thực hiện trên các đơn vị mẫu từ mỗi lô hàng.
Điều gì sẽ xảy ra nếu một bộ phận không đạt kiểm tra của bạn?
Chúng tôi không giao hàng. Chúng tôi sẽ thông báo cho bạn và đề xuất một nguồn khác hoặc hoàn tiền.
Tôi có thể gửi các bộ phận của riêng mình để kiểm tra không?
Hiện tại thì không. Dịch vụ kiểm tra của chúng tôi là một phần trong các bộ phận mà chúng tôi cung cấp.
Kiểm tra có được bao gồm trong giá không?
Kiểm tra nội bộ đã được bao gồm. Thử nghiệm tại phòng thí nghiệm bên thứ ba được báo giá riêng.
Không tìm thấy linh kiện của bạn?
Gửi cho chúng tôi số linh kiện hoặc toàn bộ danh sách BOM của bạn. Chúng tôi sẽ kiểm tra kho và mạng lưới nhà cung cấp và trả lời trong vòng 24 giờ.
