Inicio / Servicios / Quality Inspection

Electronic Component Authentication and Inspection

Buying outside the authorized channel only works if you can trust what arrives. Every part Auxicen Electronics ships goes through electronic component authentication in our Shenzhen inspection room first. Here is exactly what we check, and what we send you.

electronic component authentication under a stereo microscope

Cotización en 24 horas

Cada pieza inspeccionada antes del envío

Garantía de calidad de 365 días

Envíos a más de 60 países

The Problem: Counterfeit Electronic Components

Counterfeit electronic components are a real risk in the open market, especially for obsolete and allocated parts. Common types:

Tipo

What it is

Remarked parts

A cheaper or lower-grade part with the marking sanded off and reprinted

Recycled parts

Parts pulled from scrap boards, cleaned and sold as new

Blacktopped parts

Package resurfaced to hide old markings

Cloned or fake die

Package looks right, but the die inside is different or missing

Out-of-spec rejects

Factory rejects sold as good parts

Counterfeit semiconductors can pass a quick look and fail in the field. That is why checking component authenticity needs several methods, not one.

Inspección por rayos X de un semiconductor obsoleto

How Counterfeit Electronic Parts Enter the Supply Chain

Most counterfeit components start as electronic waste. Boards are stripped, parts are cleaned and sorted, and the best-looking ones are remarked as a newer date code, a higher temperature grade or a more expensive part number. Others are factory rejects that should have been scrapped.

These parts then pass through several traders before reaching a buyer, which is why every independent distributor needs its own electronic components counterfeit mitigation process instead of trusting the previous owner.

The risk rises sharply in two situations: when a part is obsolete and genuine stock is scarce, and during shortages when buyers accept offers they would normally question.

Visual Inspection Checklist for Components

These are the warning signs our inspectors look for first. The same visual inspection checklist is a good start for your own incoming inspection:

Área

Warning sign

Label and packaging

Label font, layout or barcode that does not match the manufacturer's format; mixed date codes in one reel; reused moisture barrier bags

Package surface

Sanding marks, a texture that differs between parts, a coating that rubs off (blacktopping)

Marking

Uneven or blurred print, wrong logo, marking that comes off with solvent

Pin 1 and mold marks

Ejector pin marks in the wrong position or filled in

Leads and balls

Re-tinned leads, solder residue, scratches, bent or uneven leads, irregular BGA balls

Dimensions

Body size or thickness outside datasheet limits

A part that passes the visual checklist is not proven genuine. Counterfeit electronic component detection needs X-ray, and for critical parts, decapsulation.

Inspection on Every Order

Five checks run on every order before anything ships.

X-ray electronic component testing showing bond wires

Verifique

Qué verificamos

What it catches

Documentation check

Part number, quantity, date code and lot code against the PO; label format against the manufacturer's standard

Wrong part, mixed lots, fake labels

External visual inspection

Leads, body, marking and surface under a stereo microscope

Bent or re-tinned leads, sanding marks, resurfacing

Prueba de permanencia de marcado

Solvent test on the marking

Reprinted (remarked) markings

Package & dimension check

Package measurements against the datasheet

Wrong package, clones

Inspección por rayos X

Die size, lead frame and bond wires, compared across samples in the lot

Missing die, wrong die, mixed parts

How We Sample Each Lot

Every unit gets the documentation and packaging check. Detailed microscope, marking and X-ray inspection is done on samples taken from different reels, trays and date codes in the lot.

Lot size

Units inspected in detail

1–10

All units

11–500

10 units, or more when the lot holds several date codes

501–5,000

20 units

Over 5,000

32 units

If any sample fails, the whole lot is held and inspected further. You can ask for 100% visual or X-ray inspection on any order; the extra time is shown in the quote.

Third-Party Electronic Component Testing

For high-reliability applications, or when a lot raises questions, we send samples to independent labs.

The cost and extra lead time are shown in your quote before you confirm.

01

Desencapsulado: to decap an IC chip, the lab removes the mold compound with acid or a laser and checks the die markings, logo and layout against the manufacturer. Decapping IC chips is destructive, so it is done on one or two samples.

02

Electrical / functional testing: key datasheet parameters.

03

Solderability testing: checks lead finish and aging.

04

XRF analysis: lead finish composition, including RoHS checks.

About AS6081 Authentication and Related Standards

Several industry standards describe how to keep counterfeit components out of a supply chain:

Standard

Proceso

Qué abarca

SAE AS6081

Distributors

Counterfeit risk mitigation, supplier control, inspection and test methods for parts bought outside the authorized channel

SAE AS5553

Equipment manufacturers

Counterfeit avoidance, detection, mitigation and disposition in an OEM's own processes

SAE AS6171

Test labs

Detailed test methods, from external visual to X-ray, XRF and decapsulation

IDEA-STD-1010

Independent distributors

Acceptability criteria for visual inspection of electronic components

AS6081 authentication is the reference most often written into purchase contracts. Our in-house checks cover the external visual, marking and X-ray steps used in this kind of process, and third-party lab tests cover decapsulation and electrical testing. If your contract requires testing to a specific standard, tell us when you request a quote and we will arrange it through an accredited lab.

What You Receive

Inspection photos

Photos for every line: labels, markings, leads.

X-ray images

X-ray images for inspected lines.

Lab report

Third-party lab report when testing was ordered.

365-day warranty

If parts fail at your incoming inspection, we replace or refund.

How to Avoid Counterfeit Electronic Components

A counterfeit avoidance program is the set of rules a buyer follows so that non-counterfeit electronic components reach production. It does not need to be complicated:

01

Buy authorized first

Use the open market only when authorized stock is not available.

02

Qualify suppliers

Ask how they inspect, what they send with each shipment and what warranty they give.

03

Evidence before paying

Date codes, stock photos and the location of the stock.

04

Inspect on arrival

At least a label, visual and marking check; X-ray or lab testing for critical parts.

05

Keep records

Supplier, lot, date code and inspection results for each delivery, so a problem can be traced.

When buying online, be careful with prices far below market and sellers who cannot show photos of the actual parts.

Where Inspection Matters Most

Componentes Electrónicos Obsoletos

Old date codes are the most common counterfeit target.

Authentication FAQ

¿Cómo puedo verificar la autenticidad del componente por mí mismo?

Comience con etiquetas y códigos de fecha, luego observe las marcas y las patillas bajo magnificación. Compare con una pieza conocida que esté en buen estado si tiene una. Para obtener resultados fiables, se necesitan rayos X y descapsulación, por lo que los realizamos internamente o a través de laboratorios.

¿Qué es un programa de evitación de falsificaciones para componentes electrónicos?

Un proceso documentado que cubre cómo se aprueban los proveedores, cómo se inspeccionan y prueban las piezas, y qué sucede con las piezas sospechosas. Normas como AS5553 para fabricantes y AS6081 para distribuidores describen lo que dicho programa debe incluir.

¿Inspecciona cada pedido?

Sí. Se realizan controles de documentación, visuales, de marcado y de dimensiones en cada pedido. Se realiza una radiografía en unidades muestreadas de cada lote.

¿Qué sucede si una pieza no pasa su inspección?

No lo enviamos. Le informamos y ofrecemos otra fuente o un reembolso.

¿Puedo enviar mis propias piezas para pruebas?

Not at the moment. Our inspection service is part of the parts we supply.

Is inspection included in the price?

In-house inspection is included. Third-party lab testing is quoted separately.

¿No Encuentra Su Pieza?

Envíenos el número de pieza o su lista completa de materiales (BOM). Revisamos nuestro stock y red de proveedores y respondemos en 24 horas.