Electronic component sourcing from China's supply network
Send a part number or a full BOM. We check part identity, the supply options available and the conditions attached to them, then reply with a quote or clarifying questions within 24 hours.
- Reply within 24h
- Source stated per line
- Samples to production
Manufacturers we source, across semiconductors and passives
Manufacturer names and marks identify the components we source and do not imply an authorized distribution relationship. See all manufacturers
Four ways to start, depending on what you have today
One part number, a part nobody can find, a full BOM, or a part you need to replace.
Component sourcing
You have a complete MPN and a quantity. From one sample to production volumes, we confirm supply options, packaging and lead time.
Obsolete & hard-to-find parts
EOL, allocated or long-lead parts. We search the network, state the risk of each source and agree inspection before you commit.
BOM sourcing & kitting
Upload the whole BOM. Every line is checked, quoted or flagged with a question, and the order ships as one kit.
Alternatives & engineering review
The original part is gone or too expensive. We list candidates with their differences; your engineers approve the change.
Nine component families, one RFQ
Each family page explains which parameters define an orderable part, which parts are commonly short, and how we handle alternatives.
MCUs & Prozessoren
8-bit, Arm Cortex-M, RISC-V and wireless MCUs; MPUs and FPGAs.
Energiemanagement
DC-DC converters, LDOs, PMICs and gate or motor driver ICs.
Speicher
NOR and NAND Flash, DRAM, EEPROM and SPI Flash.
Analog & interface
Op amps, ADCs and DACs, interface transceivers and audio amplifiers.
Funktechnik & HF
Wi-Fi and Bluetooth SoCs, modules and RF front-end parts.
Sensors & optoelectronics
Motion, environmental and current sensors; LEDs and optocouplers.
Discrete & power semiconductors
Diodes, MOSFETs, IGBTs and bipolar transistors.
Passive components
Kondensatoren, Widerstände, Induktivitäten und Quarze.
Connectors & electromechanical
Board and wire connectors, relays, switches and circuit protection.
A China-based network, with the channel named on every quote
We work with distributors, independent stockists and specialist traders across semiconductors, passives, connectors and electromechanical parts. For each enquiry we check the options available and tell you which channel the material comes from.
- Shenzhen for sourcing and inspection; Hong Kong for export consolidation
- Suppliers qualified before we buy and scored after we ship
- Date and lot codes recorded as marked; no re-marking, re-labelling or re-packing
What every quote line states
A price is only comparable when the conditions behind it are visible. Each line carries the same fields, so you can check it against your requirement before you approve.
STM32F103VGT6 · 2,000 pcs · USD
The exact part with suffix, priced in USD unless agreed otherwise
Tray, original
Tape and reel, cut tape, tray, tube or bulk, matched to what your line accepts
Within 2 years
The acceptable window and how it is confirmed before shipment
Being confirmed
Confirmed, being confirmed, or dependent on a stated condition
Tied to source status
Not a general promise
FCA Hong Kong · T/T in advance
Incoterms® 2020 with a named place, payment milestones and how long the quote holds
From RFQ to delivery in four steps
Send the requirement
Part numbers or a BOM, quantities, target date and any packaging or document needs.
Clarify and source
Within 24 hours you get a quote or a list of questions. Open items stay visible until closed.
Approve the quote
You confirm the lines, conditions and payment terms. A proforma invoice follows.
Inspect, ship, document
Agreed inspection, then shipment with commercial invoice, packing list and requested documents.
Quality you can check, and limits we state up front
We do not rely on certificates we do not hold. We publish what we inspect, what we record and where our responsibility ends.
What we inspect and record
Visual inspection in-house against a documented checklist; further testing by independent laboratories when the order requires it. For every line we record manufacturer, full MPN, quantity, date and lot code as marked, country of origin, packaging condition, source channel and incoming photos.
Was wir nicht zusichern
No authorized-distributor status, no in-house accredited laboratory, no guaranteed supply. We tell you which parts of your requirement we cannot meet before you place the order; availability, pricing and lead time are confirmed on enquiry.
Applications we support
Each application lists the typical BOM structure, the families that drive supply risk, and what to send with the RFQ.
Before you send an RFQ
What MOQ means for component orders
MOQ, MPQ and reel quantities, and how to buy below them.
BOM-Vorlage
The column layout we quote from, as a CSV you can fill in.
FAQ
Quotes, MOQ, payment, shipping, inspection and returns.
Sind Sie ein autorisierter Händler?
No. Auxicen is an independent sourcing company. Each quote states the channel the material comes from, and manufacturer names on this site identify components only.
How fast do you reply?
Within 24 hours of a complete enquiry, Monday to Friday (GMT+8), with either a quote or the questions we need answered to quote.
Is there a minimum order?
Samples and small batches are supported. Any MOQ comes from the source and is stated on the quote line.
How do I pay?
Bank transfer (T/T) to our company account is standard. New customers pay in advance; milestones for large or split deliveries are agreed in writing.
What if a part fails inspection?
Defects must be notified in writing within 30 days of the invoice date. Rejected material is handled under the conditions in the quotation and order documents.