Reply within 24 hours
Home / Services / Obsolete Components
Obsolete Electronic Components Sourcing
Need obsolete electronic components to keep a product in production or in service? Auxicen Electronics sources end-of-life parts from excess stock, OEM inventories and 1,200+ vetted suppliers worldwide, then inspects every unit before it ships. Send your part list and get a quote within 24 hours.
Quote within 24 hours
Every part inspected before shipping
365-day quality warranty
Shipping to 60+ countries
What Obsolete Components Means
A part becomes obsolete when its manufacturer stops producing it. This rarely happens overnight. Most parts move through the same lifecycle stages, and each stage changes how you should buy.
Active
In production and stocked by authorized distributors.
How to buy: through normal channels.
NRND
Not recommended for new designs; still produced, but the end is planned.
How to buy: start looking for alternatives and check stock depth.
Last time buy (LTB)
The manufacturer has issued an end-of-life notice with a final order date.
How to buy: calculate lifetime demand and place a final order.
Obsolete / EOL
Production has stopped; authorized stock is running out or gone.
How to buy: source from the open market with inspection.
Manufacturers announce these changes through product change notices (PCN) and end-of-life notices, usually 6 to 12 months before the last order date. Component obsolescence is caused by many things: a fab closing, a process node being retired, low demand, a RoHS change, or a brand being acquired and its catalog trimmed.
Why Obsolete Electronic Parts Are Hard to Buy
After the last time buy, authorized distributors sell out their remaining stock. The only supply left is in the open market: excess stock at OEMs and EMS factories, broker inventory and stock from acquired product lines. That supply is scattered, prices move quickly and counterfeit risk is high.
Typical situations we help with:
01
A product with a 10–20 year life cycle (industrial control, medical, energy, transportation) needs parts that went EOL years ago.
02
A repair or maintenance team needs a few pieces of an old board's components.
03
A redesign is planned but production must continue until the new design is qualified.
04
A brand was acquired and its part numbers were dropped, for example Linear Technology, Cypress or Fairchild parts.
How We Source Obsolete Components
Five steps from your part list to a verified shipment. Select a step to see what happens.
01
Component obsolescence lifecycle verification comes first: we confirm the part's status (NRND, last time buy, obsolete), the manufacturer's notices and the date codes that are likely to exist.
An Obsolete Electronic Parts Finder Run by People
Online parts search engines are a good first step, but for obsolete electronic parts their results are often out of date: listed stock has already been sold, or the "stock" is a broker's guess. We check every line with the actual holder before we quote. To get the fastest answer, send us:
A BOM in Excel or CSV works best. We reply line by line, including the lines we cannot find.
Upload Your BOM01
The full manufacturer part number, including the package and temperature suffix
02
Any alternative part numbers already approved on your drawing
03
Quantity needed now and over the next 12 months
04
Date code limits, if your quality system has any (for example "no older than 5 years")
05
Packaging needs: reel, tray, tube or cut tape
Component Obsolescence Management and Last Time Buys
Buying obsolete parts one shortage at a time is expensive. Teams that plan for it pay less. We support obsolescence management of electronic components in four ways:
Managing electronic component obsolescence this way turns emergency buys into planned purchases. Many customers use component obsolescence management tools or PLM software for tracking; we work from the reports those tools export.
Obsolete Semiconductors from Discontinued Brands
A large share of obsolete semiconductors comes from companies that were acquired. Their part numbers are still designed into equipment in the field. We source parts from:
Atmel
Now Microchip
Maxim Integrated
Now Analog Devices
Linear Technology
Now Analog Devices
International Rectifier
Now Infineon
Cypress Semiconductor
Now Infineon
Spansion
Now Infineon
Freescale
Now NXP
Fairchild Semiconductor
Now onsemi
National Semiconductor
Now Texas Instruments
Burr-Brown
Now Texas Instruments
Intersil
Now Renesas
IDT
Now Renesas
Micrel
Now Microchip
We also source obsolete parts from active brands such as Texas Instruments, Vishay and Infineon.
All manufacturers →
Obsolete Components We Source
Microcontrollers and memory, including legacy EEPROM, flash and SRAM
FPGAs and CPLDs from Xilinx, Altera and Lattice
Power management ICs and analog ICs
Connectors and capacitors from discontinued series, plus other obsolete electrical components such as relays and crystals
Obsolete Military Parts, Industrial and Medical Equipment
Long-life equipment is where obsolete parts matter most:
Defense and aerospace
Obsolete military components with ceramic packages, extended temperature ranges and specific date code requirements. We supply manufacturer and supplier documentation where it exists and state clearly when it does not.
Industrial automation
PLCs, drives and controllers that run for 20 years or more.
Medical devices
Equipment where a redesign means a new approval, so the original part is the only practical option.
Energy and transportation
Power conversion, rail and grid equipment with long service contracts.
Buying Obsolete Parts Without the Counterfeit Risk
Obsolete parts are the most common target for counterfeiters: old date codes, remarked packages and parts pulled from scrap boards. Every obsolete part we ship goes through our inspection process, and we tell you what we checked. For critical applications we arrange decapsulation and electrical testing at third-party labs before shipping.
When an Obsolete Part Cannot Be Found
Sometimes the market is empty or the price is no longer reasonable. Our engineers then look for a pin-to-pin compatible or functionally equivalent replacement and list the differences you need to check.
Cross Reference and AlternativesWhy Buyers Choose Auxicen as Their Obsolete Electronic Components Supplier
Many obsolete electronic component distributors only list what someone else claims to have. We are different in five ways:
01
Focus
Obsolete and hard-to-find parts are our main business, not a side service.
02
Reach
1,200+ vetted suppliers and access to OEM and EMS excess stock.
03
Verification
In-house inspection on every order, third-party lab testing when needed.
04
Speed
Quote within 24 hours; in-stock parts ship in 1–2 business days.
05
No minimum
From 1 piece for repairs to full production quantities.
Obsolete Components FAQ
Where can I buy obsolete electronic parts?
From an independent distributor that specializes in them, after the authorized channel has sold out. Choose one that verifies stock before quoting and inspects parts before shipping. You can send your list to us and get a quote within 24 hours.
What does "obsolete components" mean?
Parts the manufacturer no longer produces. They usually pass through active, NRND and last time buy stages before becoming obsolete.
Where do obsolete electronic component distributors get stock?
From excess inventory at OEMs and EMS factories, last-time-buy stock, distributor surplus and stock from acquired product lines. We buy only from suppliers we have vetted, and inspect everything we receive.
How do I buy obsolete electronic components safely?
Ask for date codes and stock photos, buy from a supplier that inspects parts before shipping, and request third-party testing for critical parts. All three are standard in our process.
Do obsolete parts cost more?
Often yes, because supply is limited. Price depends on quantity left in the market, date code and demand. We quote the actual market price and tell you if an alternative would be cheaper.
Are old date codes a problem?
Not by themselves. Properly stored parts in sealed packaging are usable after many years. Moisture-sensitive parts may need baking before assembly, and solderability testing is available for older lots.
Can you supply small quantities for repairs?
Yes. There is no minimum order.
I have unused obsolete parts. Are they worth money?
Often they are, because other manufacturers still need them. See sell excess electronic components.
What if the part is not available anywhere?
We suggest compatible alternatives and, if you agree, keep the request open and alert you when stock appears.
Can't Find Your Part?
Send us the part number or your full BOM. We check our stock and supplier network and reply within 24 hours.
